View Category

How to Guides

VCI, VPI & Encapsulation settings in the U.S.A. -- May 14 2012, 8:57 PM

List of VCI, VPI and Encapulation settings for ADSL ISPs in the U.S.A.

Change router password Netgear DG834v4 -- Nov 28 2011, 1:35 PM

This article explains the process for changing the router password on Sharedband Netgear Routers.

Generic Firewall Guide -- Nov 3 2011, 12:03 PM

Guide for configuring routers or firewalls behind Sharedband.

Routed Mode -- Aug 2 2011, 9:26 AM

How to configure a routed block on the Sharedband routers.

Configuring Draytek VPNs to work with Sharedband -- Jan 7 2011, 2:14 AM

This guide aims to help you convert an existing site to site VPN between two Drayteks, one of which is behind Sharedband.

Sharedband Port Mapping Guide -- Jan 7 2011, 2:10 AM

There are two main types of port mapping; Forwarding individual ports or ranges of ports like you would with any home router. Host allocations are much like a DMZ, it forwards all ports and protocols to the specified IP address.

Set your BT Business hub to DMZplus Mode for Sharedband Routers -- Jan 7 2011, 2:08 AM

Sometimes the Built-in SPI Firewall on the BT Business Hub can interfere with Sharedband. Also to enable the support team to further diagnose faults with Routers, it is a good idea to set your BT Business Hub to use DMZplus mode.

How to change the LAN IP Range on a Sharedband Netgear Router -- Jan 7 2011, 1:59 AM

instructions on how to change the LAN IP Range on your Sharedband Netgear Routers.

Revert Linksys WRT54GL to Stock Firmware -- Jan 7 2011, 1:56 AM

Here is a guide on how to convert your Sharedband Linksys WRT54GL to Stock Firmware when you upgrade your service and no longer require this router for Sharedband Purposes.

MTU Settings for VPN Device's -- Jan 7 2011, 1:50 AM

When using VPN Devices with Sharedband then you will need to change the MTU Setting on either the VPN Tunnel itself, or more often the MTU Value of the WAN Connection that is connected to our Routers, This is because Sharedband uses a 32 byte header that your VPN Device doesn't account for.

Change MTU on DrayTEK 2820 -- Jan 7 2011, 1:46 AM

When using some devices with Sharedband you may need to lower the MTU on the WAN Port of your Firewall Device.

Using your BT Business Hub as a wireless access point -- Jan 6 2011, 5:48 PM

Many people prefer to use their existing business hub for wireless to avoid having to reconnect all the devices to a new access point.

Using your Netgear DG834G modem for wireless -- Jan 6 2011, 5:46 PM

Many people prefer to use their existing modem for wireless to avoid having to reconnect all the devices to a new access point. Before you can use your modem with Sharedband there are a few steps you need to complete.

© 2009-2012 Sharedband - www.sharedband.com