Viewing Article
Traffic will not pass through the second Sharedband connection when networked to a Cisco ASA 5500 Series Version 8.4(4.5). This causes poor bonded speeds and packet loss.
Cause:
The ASA ARP cache only contains entries from directly-connected subnets by default.
Resolution:
You can now enable the ARP cache to also include non-directly-connected subnets by setting the following command within the ASA config:
arp permit-nonconnected
(This feature is not available in 8.5(1), 8.6(1), 8.7(1), 9.0(1), or 9.1(1))
For more information please refer to Cisco article http://www.cisco.com/en/US/docs/security/asa/asa84/release/notes/asarn84.pdf
Cause:
The ASA ARP cache only contains entries from directly-connected subnets by default.
Resolution:
You can now enable the ARP cache to also include non-directly-connected subnets by setting the following command within the ASA config:
arp permit-nonconnected
(This feature is not available in 8.5(1), 8.6(1), 8.7(1), 9.0(1), or 9.1(1))
For more information please refer to Cisco article http://www.cisco.com/en/US/docs/security/asa/asa84/release/notes/asarn84.pdf