Viewing Article

As Sharedband aggregates traffic over multiple routers, some devices can see the packets as being "Spoofed", To enable your connection to run at Optimal Speed, then you will need to turn this feature off. To do so follow the below instructions:

1) Telnet to your router

2) Check the status using the following command:

router> ip arp accept status
current status: disable

If the router returns disable as above then you will need to run the following command:

router> ip arp accept 1
Accept illegal ARP REPLY packets.

Now to check the status re-run the command:

router> ip arp accept status
current status: enable

This is know to affect the DrayTEK 2820 Series.