Viewing Article

No StarNo StarNo StarNo StarNo Star | May 14 2012, 8:57 PM |
VCI, VPI & Encapsulation settings in the U.S.A.
During configuration of your Sharedband Netgear routers in the U.S.A., you will be required to enter values for both 'Basic' and 'ADSL' settings within the 'Setup' menu of each router's graphical user interface.
More specifically, these values are: VCI, VPI, Require a login, Encapsulation method and Multiplexing method. These values can be acquired from your ISP though for your convenience we list common ones below:

ISP Requires a login VPI VCI Encapsulation Multiplexing method
4DV.Net Yes 0 32 PPPoA VC based
All Tel (1) Yes 0 35 PPPoE LLC based
All Tel (2) No 0 35 Not applicable LLC based
August.net (1) No 0 35 Not applicable LLC based
August.net (2) No 8 35 Not applicable LLC based
BellSouth Yes 8 35 PPPoE LLC based
CenturyTel (1) Yes 8 35 PPPoE LLC based
CenturyTel (2) No 8 35 Not applicable LLC based
Coqui.net Yes 0 35 PPPoA LLC based
Covad Yes 0 35 PPPoE LLC based
Earthlink (1) Yes 0 35 PPPoE LLC based
Earthlink (2) Yes 8 35 PPPoE LLC based
Earthlink (3) Yes 0 32 PPPoA LLC based
Embarq No 8 35 Not applicable LLC based
GWI No 0 35 Not applicable LLC based
QWest (1) Yes 0 32 PPPoA LLC based
QWest (2) Yes 0 32 PPPoA VC based
QWest (3) No 0 32 Not applicable LLC based
SBC (1) Yes 0 35 PPPoE LLC based
SBC (2) No 0 35 Not applicable LLC based
SBC (3) No 8 35 Not applicable LLC based
SouthWestern Bell No 0 35 Not applicable LLC based
Sprint (1) Yes 0 35 PPPoA LLC based
Sprint (2) Yes 8 35 PPPoE LLC based
SureWest Communications(1) No 0 34 Not applicable LLC based
SureWest Communications(2) Yes 0 32 PPPoE LLC based
SureWest Communications(3) Yes 0 32 PPPoA LLC based
Toast.Net Yes 0 35 PPPoE LLC based
US West Yes 0 32 PPPoA VC based
Verizon (1) Yes 0 35 PPPoE LLC based
Verizon (2) No 0 35 Not applicable LLC based